If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
Titanium carbide
The light gray crystals are cubical and have a high degree of chemical stability. Titanium carbide reacts little with hydrochloric and sulfuric acids. However, it is soluble in aqua regia (nitric, hydrofluoric, and nitric-acetic acid) and alkaline oxides.
Titanium carbide, a gray iron crystal with a metallic luster that belongs to the NaCl cubic structure, is a simple cubic structure. Carbon and titanium atoms in TiC are bonded together by strong covalent bonding. It shares several properties with metals including high melting and boiling points, hardness, and high boiling temperatures. Diamond is the only other material that can rival its hardness.
Titanium carbide has excellent thermal conductivity and electrical conductivity. This powder is superconducting even at low temperatures. TiC can be used in the production of heat-resistant metals, cemented carbides, antiwear materials, high temperature radiation materials, and other high temperature vacuum equipment. There are many other applications in different fields.
The dry powder mixture of high-purity Titanium dioxide and Carbon Black is mixed proportionally and then pressed into a tube furnace in hydrogen using either a horizontal carbon furnace or vertical carbon furnace. At 1900-2300degC reduction to get block TiC. Then pulverization for titanium carbide product. Or using carbon and sponge titanium as raw materials. Carbon and sponge Titanium (or titanium, or titanium waste recovered in carbide solid solutions) are mixed in equal proportions, heated to 1500-1700degC, in a hydrogen stream of high purity, and then finally obtained titanium carbide.
Direct carbonization of Titanium Metal:
Titanium powder (either reduced by sodium, or decomposed titanium hydride less than 325 mesh), is mixed with black carbon and molded using a pressure around 0.98 Pa. It was then heated up to 1500-17degC, in a high-purity stream of hydrogen, to infiltrate carbon. The reaction temperature, holding time and particle size are dependent on the raw material.
Gas phase reaction method:
The steam from the titanium tetrachloride mixture is then mixed with hydrocarbons containing hydrogen (benzene, methane etc.). After induction heating (or other methods), the steam is sent to deposit titanium carbide on the substrate. The reaction precipitates titania carbide on substrate. The precipitated form of titanium carbide differs depending on the reaction conditions.
Tech Co., Ltd. is a professional carbide powder We are a chemical product supplier with 12 years experience. We accept payment by Credit Card, T/T (West Union), Paypal and T/T. The goods will be shipped to overseas customers via FedEx or DHL.
You can contact us for high quality Titan carbide powder. Contact us Send an inquiry.
Titanium carbide, a gray iron crystal with a metallic luster that belongs to the NaCl cubic structure, is a simple cubic structure. Carbon and titanium atoms in TiC are bonded together by strong covalent bonding. It shares several properties with metals including high melting and boiling points, hardness, and high boiling temperatures. Diamond is the only other material that can rival its hardness.
Titanium carbide has excellent thermal conductivity and electrical conductivity. This powder is superconducting even at low temperatures. TiC can be used in the production of heat-resistant metals, cemented carbides, antiwear materials, high temperature radiation materials, and other high temperature vacuum equipment. There are many other applications in different fields.
Titanium carbid powder preparation methods:
As raw materials, titanium dioxide and carbon black are used.The dry powder mixture of high-purity Titanium dioxide and Carbon Black is mixed proportionally and then pressed into a tube furnace in hydrogen using either a horizontal carbon furnace or vertical carbon furnace. At 1900-2300degC reduction to get block TiC. Then pulverization for titanium carbide product. Or using carbon and sponge titanium as raw materials. Carbon and sponge Titanium (or titanium, or titanium waste recovered in carbide solid solutions) are mixed in equal proportions, heated to 1500-1700degC, in a hydrogen stream of high purity, and then finally obtained titanium carbide.
Direct carbonization of Titanium Metal:
Titanium powder (either reduced by sodium, or decomposed titanium hydride less than 325 mesh), is mixed with black carbon and molded using a pressure around 0.98 Pa. It was then heated up to 1500-17degC, in a high-purity stream of hydrogen, to infiltrate carbon. The reaction temperature, holding time and particle size are dependent on the raw material.
Gas phase reaction method:
The steam from the titanium tetrachloride mixture is then mixed with hydrocarbons containing hydrogen (benzene, methane etc.). After induction heating (or other methods), the steam is sent to deposit titanium carbide on the substrate. The reaction precipitates titania carbide on substrate. The precipitated form of titanium carbide differs depending on the reaction conditions.
Tech Co., Ltd. is a professional carbide powder We are a chemical product supplier with 12 years experience. We accept payment by Credit Card, T/T (West Union), Paypal and T/T. The goods will be shipped to overseas customers via FedEx or DHL.
You can contact us for high quality Titan carbide powder. Contact us Send an inquiry.