molybdenum-High quality and trust worthy chemical supplier

Blog

Multiple Applications of Molybdenum Telluride

admin / 2023-02-27 / no Comments

Molybdenum-Teuride Catalyst Today, over 99 percent of hydrogen oxide is generated from energy-intensive and polluting sources. Today, more than 99 percent of hydrogen is produced from energy-intensive, polluting sources. After 5000 cycles, the activity and selectivity for molybdenum Telluride Nanocrystals does not drop. The active attenuation was slight, but there wasn't any obvious selective attenuation. The molybdenum and telluride nanocrystals showed good catalytic stability.

Molybdenum Telluride for Communication

Thin films made of molybdenum informuride can be "attached directly" to silicon wafers. These are used to detect and produce infra red light from substrates compatible with their wavelengths. The goal of universal electro-optical conversions integrated in ubiquitous silicon-based integrated systems and high-speed optical connections may now be more feasible. A way has been found to utilize complex materials to cross the gaps and override the limitations of silicon light emission and wavelength. Their paper, "Molybdenum-telluride-based light emitting diodes" and "Photodetectors to Silicon photonic circuits," contains a lot more information. The problem with silicon lies in its lack of compatibility with optical requirements. It has amazing electrical and mechanical qualities, but not the same as other semiconductor materials. The visible wavelengths are the most common for semiconductors, while silicon is able to absorb light. The silicon waveguide integrated photodetector and light source was built on the P-N junction between molybdenum Telluride (MoTe2), which is an ultra-thin group of semiconductors known two-dimensional TMD compounds. Molybdenum-telluride, which emits infrared light and can therefore not be absorbed into silicon's infrared spectrum, is also visible. This makes it suitable for use in on-chip communications.

Molybdenum Telluride

: Medical Applications Nanomaterials, due to their distinctive characteristics have been the focal point of research in recent years. Biomedicine has seen researchers develop a variety of multifunctional nanomaterials which combine all the necessary functions for tumor treatment, diagnosis, and target. This study demonstrated that functionalized molybdenum tellinguride nanocrystals were capable of treating tumors by loading them with chemotherapeutic agents. High photothermal conversion efficiency, good cell killing capability and excellent molybdenum tellinguride nanocrystals are characteristics of Molybdenum Telluride. A high amount of molybdenum nanocrystals was observed in tumors. They also showed strong tumor cauterization. The results of in vitro and in vivo experiments showed that the nano agent had tumor targeting function, high photothermal conversion efficiency, and successfully realized accurate tumor diagnosis and combined photothermal/chemotherapy treatment. To avoid toxic side effects and body retention, it is also easy to eliminate the body. Advanc3dmaterials (aka. Advanc3dmaterials is an advanced material. With over 12 years' experience, Advanc3dmaterials is an established global supplier of chemical materials. We produce [( telluride molybdenum] that is high in purity, small particles and very low in impurity. We can help you if your requirements are lower.
Inquiry us

Silicide Powder

Molybdenum Silicide MoSi2 Powder CAS 12136-78-6

admin / 2023-02-16 / no Comments

About Molybdenum Silicide MoSi2 Powder:
MoSi2 is an intermetallic compound, molybdenum silicide is a refractory ceramic, mainly used for heating elements. It has a medium-density, a melting point of 2030 ° C, which is electrically conductive. At high temperatures, it forms a passivation layer of silica to protect it from further oxidation. The thermal stability of MoSi2 and the thermal stability of its high radiation make such materials and high radiation coatings in thermal shields from the atmosphere as they are used next to WSI2. MoSi2 is a material with a four-square crystal structure (α-modified) gray metal; its β-modification is hexagonal and unstable. It is insoluble in most acids but is dissolved in nitric acid and hydrofluoric acid.

Although molybdenum silicide has excellent oxidation and high Young's modulus at temperatures above 1000 ° C, it is brittle at lower temperatures. Moreover, at 1200 ° C or more, it will lose creep resistance. These properties are limited to their structural materials but can be shifted by using it as a composite with another material.

Molybdenum disilicide (MoSi2) is a promising candidate material for high-temperature structural applications. It is a high melting point (2030 C) material with excellent oxidation resistance and a moderate density (6.24 g/cm3). However, low toughness at low temperatures and high creep rates at elevated temperatures have hindered its commercialization in structural applications. Much effort has been invested in MoSi2 composites as alternatives to pure molybdenum disilicide for oxidizing and aggressive environments.

Molybdenum disilicide-based heating elements have been used extensively in high-temperature furnaces. The low electrical resistance of silicides in combination with high thermal stability, electron-migration resistance, and excellent diffusion-barrier characteristics is important for microelectronic applications. Feel free to send an inquiry to get the latest price if you would like to buy Molybdenum Silicide MoSi2 Powder in bulk.

Characteristics of Molybdenum Silicide MoSi2 Powder:
Molybdenum silicide MoSi2 powder (CAS 12136-78-6) has high melting point, high corrosion resistance, high oxidation resistance, good electrical conductivity, high temperature ductility, a binary alloy system the intermediate phase, dual characteristics of metals and ceramics.

Technical Parameter of Molybdenum Silicide MoSi2 Powder:

Product Name	MF	Purity	Particle Size	Melting Point	Density	Color
molybdenum silicide	MoSi2	99%	5-10um	2030℃	6.24g/cm3	dark gray

Chemical Composition of Molybdenum Silicide MoSi2 Powder:

MoSi2	Mo	Si	C	S	Fe	S	Ni
＞99%	＞60%	balance	0.2%	0.02%	0.19%	0.015%	0.05%

How is Molybdenum Silicide MoSi2 Powder produced?
Molybdenum disilicide and MoSi2-based materials are usually made by sintering. Plasma spraying can be used to produce dense monoliths and composite forms. The material produced by this method may contain a certain proportion of β-MoSi2 due to its rapid cooling.

Applications of Molybdenum Silicide MoSi2 Powder:
Molybdenum disilicide heating elements can be used for temperatures up to 1800 ° C, in electric furnaces used in laboratory and production environment in the production of glass, steel, electronics, ceramics, and in heat treatment of materials. Molybdenum disilicide is used in microelectronics as A Contact Material.

Heating element
MoSi2 is a conductive silicide that has an oxidation property due to a stable silica layer on its surface at a high temperature.
Although the top MoSi2 element can operate at temperatures up to 1800 ° C, the material is very brittle, which may suffer serious creep during use. However, they have process advantages because they can work under high electrical loads without aging, and will not exhibit increased resistivity during use. They have antioxidant properties in air, oxygen and oxygen-rich atmosphere.
Moreover, they can be used with ammonia, nitrogen, hydrogen, a rare gas, and limited vacuum, but due to the failure of the protective oxide layer, the operating temperature and life can be reduced.

MoSi2 elements are ready-made elements and can be made into a bending or straight form of a variety of sizes. These elements are mainly used in production furnaces and laboratory furnaces in ceramics, glass, steel, electronics and heat treatment industries.

High-temperature structure
Amazingness and high-temperature elasticity make MoSi2 a very promising material for high-temperature applications such as gas turbine engines. Many researchers strive to improve high temperature creep resistance and low-temperature ductility. However, there are no commercially available composites with all preferred features.

Packing & Shipping of Molybdenum Silicide MoSi2 Powder :
We have many different kinds of packing which depends on the molybdenum silicide MoSi2 powder quantity.
Molybdenum silicide MoSi2 powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Molybdenum silicide MoSi2 powder shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.

Orachemicals Nano Technology Co. Ltd. (Orachemicals) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for high-quality MoSi2 powder, please feel free to contact us and send an inquiry.

Molybdenum Silicide Properties
Other Names	molybdenum disilicide, MoSi2 powder
CAS No.	12136-78-6
Compound Formula	MoSi2
Molecular Weight	152.11
Appearance	Gray to Black Powder
Melting Point	1900-2050 °C
Boiling Point	N/A
Density	6.23-6.31 g/cm3
Solubility in H2O	N/A
Electrical Resistivity	0.0000270 - 0.0000370 ohm-cm
Specific Heat	0.437 J/g-°C (23 °C)
Tensile Strength	185 MPa (Ultimate)
Thermal Conductivity	66.2 W/m-K (23 °C)
Thermal Expansion	N/A
Vickers Hardness	900-1200
Young's Modulus	N/A
Exact Mass	153.859261


Molybdenum Silicide Health & Safety Information
Signal Word	Warning
Hazard Statements	H302-H312-H332
Hazard Codes	Xn
Risk Codes	20/21/22
Safety Statements	36
RTECS Number	N/A
Transport Information	N/A
WGK Germany	3

Inquiry us

Telluride Powder

Molybdenum Telluride MoTe2 Powder CAS 12058-20-7

admin / 2023-02-09 / no Comments

About Molybdenum Telluride MoTe2 Powder:
Molybdenum telluride (MoTe2) is a gray hexagonal powdered solid, which has a variety of forms, among which MoTe2 and Mo3Te4 are stable in air, decompose in alkali, insoluble in water, soluble in nitric acid, decompose in vacuum at high temperatures (not melting). Molybdenum telluride is often used as a solid lubricant in various fields.

Molybdenum telluride is a compound of molybdenum and tellurium corresponding to a mass percentage of 27.32% of molybdenum and 72.68% of tellurium. It can crystallize into two-dimensional sheets that can then be diluted into a flexible, almost transparent monolayer. It's a semiconductor. It fluoresces. It is part of the transition metal halogenated materials. As a semiconductor, the bandgap is located in the infrared region. This raises the potential use of semiconductors in electronic or infrared detectors. RBOSCHCO is a trusted global Molybdenum Telluride MoTe2 Powder supplier. Feel free to send an inquiry about the latest price of Molybdenum Telluride at any time.

Product Performance of Molybdenum Telluride MoTe2 Powder :

MoTe2 is a gray hexagonal powdery solid with various morphologies. Among them, MoTe2 and Mo3Te4 are stable in air and decompose in alkali. It is insoluble in water, soluble in nitric acid, and can decompose (not melt) at high temperatures in a vacuum.

Technical Parameter of Molybdenum Telluride MoTe2 Powder :

Product Name	MF	Purity	Particle Size	Molecular Weight	CAS	Color
MolybdenumTelluride	MoTe2	99.99%	-100 mesh	351.14	12058-20-7	Gray Black

How is Molybdenum Telluride MoTe2 Powder Produced?
Molybdenum can form a series of homogeneous compounds with sulfur, selenium and tellurium. Molybdenum disulfide (MoS2), molybdenum selenide (MoS2) and molybdenum ditelluride (MoTe2) are heterogeneous iso phase compounds. These compounds are usually formed by combining the corresponding elements directly at high temperatures in a sealed vacuum tube.
MoTe2(Motex x=1.88 ~ 2) and Mo3Te4 can be formed by the reaction of MoTe2 and Mo3Te4 within 15 minutes at 430℃.
Reactive: Mo+2Te → MoTe2

Applications of Molybdenum Telluride MoTe2 Powder:
Potential uses of MoTe2 are lubricants, electronics, optoelectronics or photocell materials.

Make transistors with MoTe2.MoTe2 has the potential to manufacture low-power electronic products. Field-effect transistors (FETs) are made up of two, three, and thicker nanolayers. A bipolar field-effect transistor has been built, as well as a field-effect transistor that can operate in either N or P mode, with two top electrodes.

Because MoTe2 has two phases, it is possible to construct a device in the form of a 2H semiconductor and 1T' metal.

The MOSFET can consist of a thin layer of MoTe2 covered by a gate consisting of an ionic liquid or a liquid electrolyte such as potassium perchlorate dissolved in polyethylene glycol. When the gate voltage is below 2 volts, the device operates in electrostatic mode, and the current from drain to source is proportional to the gate voltage. Beyond 2 volts, the device enters an intermediate region where the current does not increase. A current of more than 3.5 volts leaks through the gate and electrolysis occurs when potassium atoms are inserted into the MoTe2 layer. Potassium intercalated molybdenum ditelluride is superconducting below 2.8 K.

As a lubricant, molybdenum ditelluride works well in a vacuum at temperatures up to 500 ° C with a coefficient of friction below 0.1. However, molybdenum disulfide has less friction, whereas molybdenum diselenide can function at higher temperatures.

Molybdenum ditelluride can form at the contact point, and if this is n-type, then small pieces of the molybdenum ditelluride nano-layer can be mixed or dispersed in the molten tin without reacting, which doubles the stiffness of the composite.

Molybdenum ditelluride has been examined for protein substrates by atomic force microscopy. It is superior because proteins stick harder than traditional materials such as mica.

Storage Condition of Molybdenum Telluride MoTe2 Powder :
The damp reunion will affect MoTe2 powder dispersion performance and using effects, therefore, molybdenum telluride MoTe2 powder should be sealed in vacuum packing and stored in cool and dry room, molybdenum telluride can not be exposure to air. In addition, the MoTe2 powder should be avoided under stress.

Packing & Shipping of Molybdenum Telluride MoTe2 Powder :
We have many different kinds of packing which depend on the molybdenum telluride MoTe2 powder quantity.
Molybdenum telluride MoTe2 powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Molybdenum telluride MoTe2 powder shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.

Molybdenum Telluride Properties
Other Names	molybdenum ditelluride, molybdenu(IV) telluride, MoTe2 powder
CAS No.	12058-20-7
Compound Formula	MoTe2
Molecular Weight	351.14
Appearance	Gray Black Powder
Melting Point	N/A
Boiling Point	N/A
Density	7.7 g/cm3
Solubility in H2O	N/A
Exact Mass	355.716


Molybdenum Telluride Health & Safety Information
Signal Word	Danger
Hazard Statements	H301-H332
Hazard Codes	T
Risk Codes	N/A
Safety Statements	N/A
Transport Information	UN 3284 6.1 / PGIII

Inquiry us

Blog

Why molybdenum carbide powder has good corrosion resistance?

admin / 2023-02-05 / no Comments

What's molybdenum caride powder? The global consumption structure can be viewed through the lens of molybdenum caride Powder Iron is actually a friend of molybdenum. The majority of molybdenum demand in Western countries comes from steel. It is 30% stainless steel and 30% low-alloy. 10% drilling and cutting tools and 10% cast steel. 20 percent of molybdenum goes into chemicals, petroleum refining and molybdenum based lubricants. In 1998, the average molybdenum consumption in American steel production was 75%. Additionally, Molybdenum based electronics, Metal processing and aerospace industry alloys are increasingly being used.

Molybdenum caride Powde:
As a coating or additive material, nanometer molybdenum carbonide is possible. You can also use it to create particle reinforced alloys. Molybdenum carbonide's electronic structure and catalytic characteristics are similar to that of noble metals. It has hydrogen denitrogenation and hydrogenolysis activity. Molybdenum is expected become an alternative to precious metals. It is also used in the manufacture of chromium free special alloys, engineering ceramics, and other materials. It serves many purposes, including hard tool material and wear resistance material. Also, it is used for heating elements and high-temperature structures. This is used in the manufacture of semiconductor films and wear-resistant film. It is also used in the manufacture of molybdenum caride. It is also used in the production of engineering ceramics and special alloys that are chromium free.

Molybdenum Carbide Pulse is Now Available in New Applications
A molybdenum disilicide mo02 (MoSi2) Mo02 is the key to solving the low elasticity problem and high oxidation problem. The molybdenum reacts with oxygen at 800, forming a complex composite. When it condenses, it forms a yellowish white cloud. This presents a major engineering challenge for those who want to take advantage of the molybdenum strengths and creep resistance. Although it is capable of self-healing, the coating is silicon-rich and has poor resistance to thermal cycling. Mo-Sii-B is a composite with Molybdenum diilicide in the matrix. It has excellent strength and resistance to oxidation, but it's limited use for small-batch products. This composite of molybdenum silica boron and molybdenum disilicide was designed to have high mechanical characteristics comparable to TZM, with excellent oxidation resistance. Mo5SiB T2 (the matrix phase) was used in the composite. The second phase consisted of metal molybdenum. This metal phase increased the strength of the composite and could also create a self healing oxide skin. Mo-6Ti2.2Si-1.1B composite was created with titanium. It was then exposed to air at 1370 degrees for 2 hours. A naked eye could not see the difference, making it superior to TZM. This is a remarkable achievement in molybdenum alloy.

Prices for molybdenum caride powder
Price of molybdenum powder will depend on the particle size and purity. The purchase volume may also have an impact on the price. Large quantities of small amounts will result in a lower price. On our official website, you can see the price for molybdenum caride Powder.

Molybdenum caride powder supplier
The Advanc3dmaterials Advanced Material Nano Technology Co. Ltd. Luoyang City is located in Henan Province, China. This city, called "Advanc3dmaterials", has a reputation for being a trusted and reliable global supplier of chemical materials. This company is a trusted supplier of high quality chemical materials and nanotechnology products with more than 12 years experience, such as molybdenum carbonide powder, nitride Powder, graphite and sulfide Powder. We are happy to provide high quality and affordable molybdenum carbonide powder. Get in touch You can also inquire at any time.

Inquiry us

Blog

Is molybdenum carbide a Mxene？

admin / 2023-02-04 / no Comments

What's molybdenum caride?

Molybdenum carbonide exhibits a high melting temperature and hardness. It is also very resistant to heat and corrosion. Molybdenum (silver-white refractory) metal has a melting point at 2615, and a density 102g/cm3. The Molybdenum expansion coefficient is very low and almost equals that of special glass used for electronic tubes. Molybdenum will not oxidize quickly if its temperature is above 600. Molybdenum can be made by reacting with carbon, hydrogen, and carbon monoxide over 800. Molybdenum carbid Mo2C=203.88 contains 5.89% carbon. The dark-gray metallic powder has a dense hexagonal crystal with a density 9.18g/cm3 a melting temperature of 2690. The new material has excellent chemical and corrosion resistance and a high melting points and hardness. With electronic structure and catalytic characteristics similar to those of precious metals, it can be widely used as a catalyst for reactions involving hydrogens, such as alkane isomerization, unsaturated hydrocarbon hydrogenation, hydrodesulfurization, and denitrification. It exhibits high hardness and is resistant to wear. It is an important component of molybdenum-molybdenum carbide hard coating and other cermet coatings and can also be used as a wear-resistant and scratch-resistant coating alone.

For what purpose is molybdenum caride used?

Molybdenum carbide is part of the transition-metal carbide group. It's a type of intermediated compound that has metal properties. Metal carbide, an innovative functional material, has shown promise in many fields, including high temperature, chemical corrosion, and abrasion resistance.

Nickel, molybdenum (and chromium) can help reduce embrittlement in alloy steel heat treatments as an all-alliance to steel. In high-speed stainless steel, the United States is leading the way in replacing tungsten with molybdenum. According to research, molybdenum can twice the "capacity” of tungsten. Steel containing 18% of tungsten can easily be replaced with steel that contains 9% molybdenum. This allows for steel to have a lower production cost. In stainless steel, molybdenum plays a vital role in improving corrosion resistance, strength and weldability. As you can see, molybdenum is an important component of the iron- and steel industry.

Molybdenum, molybdenum alloys, have excellent electrical and thermal conductivity and high strength. You can use the conventional methods to produce plates, sheets, foils and tubes as well as wires and rods in electronic tubes (grid & anode), electrical light source (supporting materials), metal processing tools (die casting, extrusion and forging dies and punching holes), and other parts such as electric tubes (grid & anode) and electronic tubes (grid & anode).

Molybdenum is very low in vapor pressure at the vacuum furnace's operating temperature and pressure. Molybdenum pieces are less likely to cause damage to workpieces, or other materials in the furnace. High molybdenum components such as heating elements or heat insulation packs will last for many years without any evaporation. Molybdenum's high strength makes it an excellent electrode for glass treatment. Chemically, molybdenum works well with many glass components. It also has no harmful chromogenic side effects as a tiny amount dissolves in the bath. The service life of this heating electrode can exceed 3 to 5 years in a glass melting oven.

Chemical characteristics of molybdenum caride
Molybdenum carbide is a grey hexagonal crystal. This metal has high melting points and hardness. It is also resistant to heat and chemical corrosion. The melting point for this product is 2692. Water and alkali insoluble. It can be slightly soluble with nitric acid and sulfuric acid.

Prices for molybdenum caride
Many factors affect the molybdenum-carbide market price. Presently, the market price of molybdenum carbide is in a dynamic process. You can contact us anytime if you require it.

supplier of molybdenum caride
Advanc3dmaterials (aka. With 12 years experience, Advanc3dmaterials (aka. Our company currently has a number of powder materials. You can also order OEM. Please contact us for more information or to submit an inquiry about molybdenum carbide.

Inquiry us

Boride Powder

Molybdenum Boride MoB2 Powder CAS 12006-99-4

admin / 2022-11-03 / no Comments

About Molybdenum Boride MoB2 Powder: Molybdenum boride powder is a compound of molybdenum and boron.Their most notable feature is their high hardness. It has very high strength, very high hardness, good high-temperature resistance, good electrical conductivity and excellent oxidation resistance. Molybdenum boride has been used as a hard coating material for high-temperature structural applications and also in the form of Mob /CoCr cermet coatings. It is also used as a brazing material, especially in electronic components. Molybdenum boride has potential industrial application value, such as wear-resistance and corrosion resistance. Feel free to send an inquiry to get the latest price if you would like to buy Molybdenum Boride MoB2 Powder in bulk. Molybdenum boride powder MoB2 Features: CAS No. : 12006-99-4 EINECS No.: 234-502-8 MDL No.: MFCD00014219 Appearance: yellow grey crystal Molecular Formula: MoB2 Molecular Weight: 202.69 Density: 9.26 g/ cm3 Melting point: 2280 ºC Particle size: 5-10um Application of Molybdenum Boride MoB2 Powder: Molybdenum Boride (MO2B) is used for brazing (welding) special metals and non-corrosive electronic connectors and switches. Molybdenum boride (Mo2B) is also used in the manufacture of high-speed cutting tools and mechanical corrosion-free, wear-resistant parts. Molybdenum boride (Mo2B) is mainly used as an additive of electron tungsten and molybdenum alloy. Molybdenum boride (Mo2B) can be used in the manufacture of wear semiconductor thin films and coatings. Storage Condition of Molybdenum boride powder MoB2: The damp reunion will affect MoB2 powder dispersion performance and using effects, therefore, molybdenum boride MoB2 powder should be sealed in vacuum packing and stored in cool and dry room, the molybdenum boride MoB2 powder can not be exposure to air. In addition, the MoB2 powder should be avoided under stress. Packing & Shipping of Molybdenum boride powder MoB2: We have many different kinds of packing which depend on the molybdenum boride MoB2 powder quantity. Molybdenum boride MoB2 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request. Molybdenum boride MoB2 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.

Molybdenum Boride MoB2 Powder Properties
Other Names	Molybdenum monoboride, Borylidynemolybdenum, CAS 12007-27-1 (molybdenum diboride, MoB2)
CAS No.	12006-99-4
Compound Formula	MoB2
Molecular Weight	106.75
Appearance	Gray to blue powder/pieces
Melting Point	N/A
Solubility in water	N/A
Density	9.20 g/cm3
Purity	>99%
Particle Size	5-10um
Boling point	N/A
Specific Heat	N/A
Thermal Conductivity	N/A
Thermal Expansion	N/A
Young's Modulus	N/A
Exact Mass	108.914714
Monoisotopic Mass	108.914711 Da


Molybdenum Boride MoB2 Powder Health & Safety Information
Safety Warning	Warning
Hazard Statements	N/A
Flashing point	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Statements	N/A
RTECS Number	N/A
Transport Information	N/A
WGK Germany	3