If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
What is it?
Tantalum Carbide
?
Tantalum carbide is a light-brown metallic cubic crystal powder that belongs to the sodium-chloride type cubic crystal system. Tantalum carbid can also be used as a cemented-carbid sintered grain growth inhibiter. The density of the powder is 14.3g/cm3. Insoluble in water, insoluble with inorganic acid, soluble and decomposed in mixed acid of hydrofluoric and nitric acids. It has strong antioxidant properties and can be easily melted and broken down by potassium pyrosulfate. Superior conductivity and resistance at room temperatures of 30O. Powder metallurgy, fine ceramics and chemical vapor deposition are all used. Tantalum carbide can be used to make watch decorations with its sintered body. It is also available in golden yellow.
Tantalum Carbide’s main features
Tantalum carbide ceramic particles (TaC), which have a high melting point of 3880degC, high hardness (2100HV0.05), chemical stability, high electrical and thermal conductivity, and good chemical stability. Aluminum base and other substrates. Chao et al. The laser cladding technique was used to create a nickel-based reinforced tandemlum carbide surface composite material. Yu et.al. showed that the material’s hardness is significantly higher than that of pure nickel. The wear rate is also significantly lower than that for hardened steel. The relationship between in situ reaction directional solidification tantalum carbonide enhanced with base, chromium and aluminum bases and its microstructure. The results reveal that as solidification rate increases, so does the solid phase structure. Additionally, tantalum-carbidide volume fractions also change with solidification rate. Wang Wenli et al. The laser cladding technique was used to prepare an in-situ TaC alloy-enhanced nickel-based coating on A3-steel. Smooth surface with a strong metallurgical connection between the substrate and coating. Unfortunately, very few reports have been made about the in-situ generation of TaC from steel substrates. In this experiment, we used the surface ceramic particle reinforced iron matrix composite. TaC particles are used as the reinforcement phase. Analyses were made of the micromorphology and reaction processes of TaC particles, in-situ reinforced iron based surface composites.
Tantalum Carbide has many applications
1. Cemented carbide is used a lot as an additive. Its primary function is to improve the high-temperature strength of cemented carbide and to inhibit the growth of tungsten carbonide particles.
2. Use it as a hard coat to protect the base metal from chemical corrosion and wear.
3. It is used by the military to protect jet engine turbine blades from chemicalbook corrosion and rocket nozzles. This will significantly increase its ablation resistance and extend its service-life.
4. Because of its high electrical conductivity. Because of its good electrical conductivity, it can be used to make electrode materials and can be cut with wire EDM into intricate shapes.
5. It is the second phase of a composite material made from particle reinforced metal matrix composite materials. This has been widely used in aerospace, metallurgy and mining.
Tantalum Carbide’s main supplier
Tech Co., Ltd. () is a professional carbide powder Over 12 years’ experience in chemical product development and research. We accept credit cards, T/T and West Union payments. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.
You can find high-quality powdered boron carbide here Please contact us Send an inquiry
Tantalum carbide is a light-brown metallic cubic crystal powder that belongs to the sodium-chloride type cubic crystal system. Tantalum carbid can also be used as a cemented-carbid sintered grain growth inhibiter. The density of the powder is 14.3g/cm3. Insoluble in water, insoluble with inorganic acid, soluble and decomposed in mixed acid of hydrofluoric and nitric acids. It has strong antioxidant properties and can be easily melted and broken down by potassium pyrosulfate. Superior conductivity and resistance at room temperatures of 30O. Powder metallurgy, fine ceramics and chemical vapor deposition are all used. Tantalum carbide can be used to make watch decorations with its sintered body. It is also available in golden yellow.
Tantalum Carbide’s main features
Tantalum carbide ceramic particles (TaC), which have a high melting point of 3880degC, high hardness (2100HV0.05), chemical stability, high electrical and thermal conductivity, and good chemical stability. Aluminum base and other substrates. Chao et al. The laser cladding technique was used to create a nickel-based reinforced tandemlum carbide surface composite material. Yu et.al. showed that the material’s hardness is significantly higher than that of pure nickel. The wear rate is also significantly lower than that for hardened steel. The relationship between in situ reaction directional solidification tantalum carbonide enhanced with base, chromium and aluminum bases and its microstructure. The results reveal that as solidification rate increases, so does the solid phase structure. Additionally, tantalum-carbidide volume fractions also change with solidification rate. Wang Wenli et al. The laser cladding technique was used to prepare an in-situ TaC alloy-enhanced nickel-based coating on A3-steel. Smooth surface with a strong metallurgical connection between the substrate and coating. Unfortunately, very few reports have been made about the in-situ generation of TaC from steel substrates. In this experiment, we used the surface ceramic particle reinforced iron matrix composite. TaC particles are used as the reinforcement phase. Analyses were made of the micromorphology and reaction processes of TaC particles, in-situ reinforced iron based surface composites.
| Tantalum Carbide Properties | |
| Other Titles | tantalum(IV) carbide, TaC powder |
| No. | 12070-06-3 |
| Combination Formula | TaC |
| Molecular Weight | 192.96 |
| Appearance | Brown to Dark Brown Powder |
| Melting Point | 3850 degC |
| Boiling Point | 4780-5470 degC |
| Density | 14.3-14.7 g/cm3 |
| Solubility of H2O | Insoluble |
| Specific heat | 36.71 J/mol*K |
| Thermal Conductivity | 21 W/m*K |
| Exact Mass | 192.947996 |
Tantalum Carbide TaC Powder Cas 12070-06-3
1. Cemented carbide is used a lot as an additive. Its primary function is to improve the high-temperature strength of cemented carbide and to inhibit the growth of tungsten carbonide particles.
2. Use it as a hard coat to protect the base metal from chemical corrosion and wear.
3. It is used by the military to protect jet engine turbine blades from chemicalbook corrosion and rocket nozzles. This will significantly increase its ablation resistance and extend its service-life.
4. Because of its high electrical conductivity. Because of its good electrical conductivity, it can be used to make electrode materials and can be cut with wire EDM into intricate shapes.
5. It is the second phase of a composite material made from particle reinforced metal matrix composite materials. This has been widely used in aerospace, metallurgy and mining.
Tantalum Carbide’s main supplier
Tech Co., Ltd. () is a professional carbide powder Over 12 years’ experience in chemical product development and research. We accept credit cards, T/T and West Union payments. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.
You can find high-quality powdered boron carbide here Please contact us Send an inquiry